Dojo Tools

Below are the various generators, threads and other tools included with the %base desk and usable in the dojo. These are organized into rough categories for convenience.

These may be invoked in one of three ways:

  • + means a generator (standalone computation) which changes nothing in the system
  • | means a “Hood” generator which may make changes to the system
  • - means a thread

Apps and updates

These tools are for managing desks, apps and updates. Install, uninstall, suspend, resume, pause updates, etc.

+agents

Print out the status of Gall agents on a desk.

Agents may either be archived or running. Nuked or unstarted agents which are not on the manifest are omitted.

Arguments

desk

Example

> +agents %landscape
status: running %hark-system-hook
status: running %treaty
status: running %docket
status: running %settings-store
status: running %hark-store

|bump

Try to apply a kernel update.

If %zuse's kelvin version has decreased, try to apply the update. If any desks are incompatible with the new %zuse version, the update will fail. The update can be forced with the optional force argument, in which case incompatible desks will be |suspended. The set of desks to omit (and therefore suspend) can also be explicitly specified with the optional except argument.

Arguments

All optional:

, =force ?, =except (set desk)

Examples

Try to apply update, failing if blocked by any desks:

|bump

Force the update, suspending incompatible desks:

|bump, =force &

Apply kernel update, omitting and suspending the specified desks:

|bump, =except (silt ~[%bitcoin %webterm])

|install

Install a desk, starting its agents and listening for updates.

If it's a remote desk we don't already have, it will be fetched. The agents started will be those specified in the desk.bill manifest. If it has a docket file, its tile will be added to the homescreen and its glob fetched. If we already have the desk, the source for updates will be switched to the ship specified.

It takes a ship and desk as its mandatory arguments. The desk may be installed with a different name specified in the optional local argument.

Arguments

ship desk, =local desk

Examples

|install ~zod %bitcoin
|install our %webterm
|install ~zod %bitcoin, =local %foo

|nuke

Shut down an agent and permanently delete its state.

The default behaviour is to shut down the specified Gall agent and discard its state, similar to the now-deprecated |fade generator. Note this irreversibly wipes the app's state. Additionally, if the optional desk argument is %.y, it takes a desk rather than an agent name and nukes every agent on the specified desk.

Arguments

@tas, =desk ?

Examples

Nuke a single agent:

|nuke %btc-wallet

Nuke every agent on a desk:

|nuke %bitcoin, =desk &

|ota

Set the source of updates for the %base desk (the kernel and core apps) to the specified ship. Automatic updates will be enabled, and any new updates available will be fetched and installed.

Arguments

ship

Examples

|ota ~marzod is equivalent to |install ~marzod %kids, =local %base.


|pause

Pause updates on a desk.

The specified desk will stop tracking updates from its upstream source.

Arguments

desk

Examples

|pause %bitcoin

|rein

Adjust the state of a desk.

This allows you to stop and start agents on a desk, regardless of whether they're on the manifest. Stopped agents have their states archived. It can also suspend and revive the whole desk with the optional liv argument.

Arguments

desk (list [? dude:gall]), =liv ?

Examples

Start an agent:

|rein %bitcoin [& %btc-provider]

Stop an agent, archiving its state:

|rein %bitcoin [| %btc-wallet]

Stop one agent, start another:

|rein %bitcoin [| %btc-wallet] [& %btc-provider]

Suspend a desk:

|rein %bitcoin, =liv |

Revive a desk:

|rein %bitcoin

|resume

Resume updates on a desk.

Start tracking previously |paused updates from a desk's upstream source.

Arguments

desk

Examples

|resume %bitcoin

|revive

Revive all agents on a desk, migrating archived states.

All agents specified in desk.bill which are suspended will be restarted. If updates to the agents have occurred since their states were archived, they'll be migrated with the state transition functions in the agent. This generator does the same thing as selecting "Resume App" from the app tile's hamburger menu.

Arguments

desk

Examples

|revive %bitcoin

+show-vat

Print kelvin version and manifest.

This prints the contents of /sys/kelvin and /desk/bill.

Example

> +show-vat %landscape
/sys/kelvin:
[%zuse 418]
/desk/bill:
~[%docket %treaty %hark-store %hark-system-hook %settings-store]

|start

Start an agent.

Arguments

term term

This first term is mandatory, the second is optional. If two terms are provided, the first is the desk and the second is the agent on that desk to start. If only one term is provided, it's the name of the agent, and the desk is inferred to be the current desk (typically %base).

Example

> |start %landscape %chat-cli
>=

|suspend

Shut down all agents on a desk, archiving their states.

The tile in the homescreen (if it has one) will turn gray and say "Suspended" in the top-left corner. This generator does the same thing as selecting "Suspend" from an app tile's hamburger menu.

Arguments

desk

Examples

|suspend %bitcoin

|uninstall

Uninstall a desk, suspending its agents and ignoring updates.

The specified desk will be retained in Clay, but its agents will all be stopped and have their states archived like |suspend. This is the reverse of |install.

Note that this will not remove the tile or glob from the homescreen, so if the desk has a tile it should be uninstalled with the "Remove App" button in the tile's hamburger menu.

Arguments

desk

Examples

|uninstall %bitcoin

+vat

Print out the status of a single installed desk.

Desks in Clay which aren't installed will be omitted. See the related +vats command for details of the individual status fields.

Arguments

desk, =verb ?

The desk is mandatory while =verb is optional and sets verbosity. If =verb is |, the print-out will be brief. If =verb is & or not specified at all, the print-out will be more detailed.

Examples

Default verbosity (high):

> +vat %base
/sys/kelvin: [%zuse 414]
base hash: 0v8.n40h1.hjn8c.e762q.ncgh0.e4gq3.6n3l5.5kt8l.6gtdr.ovbah.u3avd
%cz hash: 0v8.n40h1.hjn8c.e762q.ncgh0.e4gq3.6n3l5.5kt8l.6gtdr.ovbah.u3avd
app status: running
force on: ~
force off: ~
publishing ship: ~
updates: local
source ship: ~
source desk: ~
source aeon: ~
kids desk: ~
pending updates: ~

Low verbosity:

> +vat %base, =verb |
/sys/kelvin: [%zuse 414]
app status: running
publishing ship: ~
pending updates: ~

+vats

Print out the status of each installed desk.

Also see the related +vat command, which prints the status of a single desk rather than all desks.

Fields:

  • /sys/kelvin - The kernel version(s) the desk is compatible with.
  • base hash - The merge base (common ancestor) between the desk and its upstream source.
  • %cz hash - The hash of the desk.
  • app status - May be suspended or running.
  • force on - The set of agents on the desk which have been manually started despite not being on the desk.bill manifest.
  • force off - The set of agents on the desk which have been manually stopped despite being on the desk.bill manifest.
  • publishing ship - The original publisher if the source ship is republishing the desk.
  • updates - May be local, remote or paused. Local means it will receive updates via commits on the local ship. Remote means it will receive updates from the source ship. Paused means it will not receive updates.
  • source desk - The desk on the source ship.
  • source aeon - The revision number of the desk on the source ship.
  • pending updates - Updates waiting to be applied due to kernel incompatibility.

Arguments

?(%suspended %running %blocking %nonexistent), =verb ?, =show-suspended ?, =show-running ?, =show-blocking ?, =show-nonexistent ?

All arguments are optional.

With no arguments, it prints verbose details for all desks. If the optional =verb argument is set to |, verbosity is reduced.

It may optionally take one of four filters as a primary argument:

  • %suspended: filter for suspended desks only.
  • %running: filter for desks that are installed and running.
  • %blocking: filter for desks that are blocking a kernel update due to incompatibility.
  • %nonexistent: filter for desks we should have but don't yet.

Alternatively, these filters can be excluded from the default output of everything by setting one or more of the =show-* arguments to |.

Examples

Print everything verbosely (no arguments):

> +vats
%base
/sys/kelvin: [%zuse 414]
base hash: 0v8.n40h1.hjn8c.e762q.ncgh0.e4gq3.6n3l5.5kt8l.6gtdr.ovbah.u3avd
%cz hash: 0v8.n40h1.hjn8c.e762q.ncgh0.e4gq3.6n3l5.5kt8l.6gtdr.ovbah.u3avd
app status: running
force on: ~
force off: ~
publishing ship: ~
updates: local
source ship: ~
source desk: ~
source aeon: ~
kids desk: ~
pending updates: ~
::
%landscape
/sys/kelvin: [%zuse 416] [%zuse 415] [%zuse 414]
base hash: ~
%cz hash: 0v18.hnfi7.tps9t.0bv04.ikolg.ge98v.6f24v.a65m7.hlicn.rcl98.3skdu
app status: running
force on: ~
force off: ~
publishing ship: [~ ~lander-dister-dozzod-dozzod]
updates: remote
source ship: ~lander-dister-dozzod-dozzod
source desk: %landscape
source aeon: 0
kids desk: ~
pending updates: ~
::
.......

Print suspended desks:

> +vats %suspended
%foo
/sys/kelvin: [%zuse 415]
base hash: 0vo.9f28r.java2.qnmqf.b3t1l.65mlu.8qsql.hq0cv.fpmdr.vuo1e.iehht
%cz hash: 0vo.9f28r.java2.qnmqf.b3t1l.65mlu.8qsql.hq0cv.fpmdr.vuo1e.iehht
app status: suspended
force on: ~
force off: ~
publishing ship: ~
updates: local
source ship: ~
source desk: ~
source aeon: ~
kids desk: ~
pending updates: ~
::

Print suspended desks with low verbosity:

> +vats %suspended, =verb |
%foo
/sys/kelvin: [%zuse 415]
app status: suspended
publishing ship: ~
pending updates: ~
::

Print everything with low verbosity except suspended desks and blocking desks:

> +vats, =verb |, =show-blocking |, =show-suspended |
%groups
/sys/kelvin: [%zuse 417] [%zuse 416] [%zuse 415] [%zuse 414]
app status: running
publishing ship: [~ ~sogryp-dister-dozzod-dozzod]
pending updates: ~
::
%base
/sys/kelvin: [%zuse 414]
app status: running
publishing ship: ~
pending updates: ~
::
%landscape
/sys/kelvin: [%zuse 416] [%zuse 415] [%zuse 414]
app status: running
publishing ship: [~ ~lander-dister-dozzod-dozzod]
pending updates: ~
::
.........

+trouble

Print out the status of each installed desk.

This is a synonym for +vats.

Example

See +vats.


Azimuth

Tools for managing PKI updates from Azimuth.

+azimuth-block

Print the most recent Ethereum block that has been processed.

This is a good way to check if your ship's somehow got behind on PKI state. If the block printed is substantially behind the most recent Ethereum block, it indicates a problem. Note it's normal for it to be a little behind.

Example

> +azimuth-block
15.664.748

:azimuth|kick

Kick Azimuth.

Restart %eth-watcher, resubscribe, re-process snapshot and updates.

Example

> :azimuth|kick
>=
ship: processing azimuth snapshot (0 points)

:azimuth|listen

Add a source for PKI updates for a list of ships.

Sets the source that the public keys for a set of ships should be obtained from. This can either be a Gall agent that communicates with an Ethereum node as in the case of galaxies, stars, and planets, or a ship, as in the case of moons.

Arguments

Either:

(list ship) %ship ship

Or:

(list ship) %app term

The list of ships are those for which you want Azimuth updates from the specified source. The source is either a ship (%ship ~sampel) or an agent (%app %some-agent).

Example

> :azimuth|listen ~[~sampel ~palnet] %ship ~wet
>=

-azimuth-load

Refetch and load Azimuth snapshot.

Example

> -azimuth-load
ship: loading azimuth snapshot (106.177 points)
[%eth-watcher 'overwriting existing watchdog on' /azimuth]
ship: processing azimuth snapshot (106.177 points)

+azimuth-sources

List all Azimuth sources.

This will print a state-eth-node:jael structure. Its contents is mostly other ships who are sources for updates about moons, but it will also include %azimuth.

Example

> +azimuth-sources
[ top-source-id=0
sources={}
sources-reverse={}
default-source=0
ship-sources={}
ship-sources-reverse={}
]

:azimuth|watch

Change node URL and network for Azimuth.

Arguments

cord ?(%mainnet %ropsten %local %default)

The first argument is the note URL in a cord like 'http://eth-mainnet.urbit.org:8545' . The second argument specifies the network.

Example

> :azimuth|watch 'http://eth-mainnet.urbit.org:8545' %default
>=

CLI Apps

These commands are for managing the dojo and other CLI apps.

:dojo|acl

Show which ships you've allowed remote access to your dojo.

Example

~zod:dojo> :dojo|allow-remote-login ~bus
>=
~zod:dojo> :dojo|acl
>=
{~bus}

:dojo|allow-remote-login

Allow a ship to |link your dojo.

Arguments

The ship you want to allow remote access.

ship

Example

Allow ~bus to link ~zod's dojo:

~zod:dojo> :dojo|allow-remote-login ~bus
>=
~zod:dojo> :dojo|acl
>=
{~bus}

Link ~zod's dojo on ~bus:

~bus:dojo> |link ~zod %dojo
>=
[linked to [p=~zod q=%dojo]]
~zod:dojo>

:dojo|wipe

Clear the dojo's subject.

This will clear all values pinned to the dojo's subject with commands like =foo 42.

Example

> =foo 42
> foo
42
> :dojo|wipe
>=
> foo
-find.foo
dojo: hoon expression failed

:dojo|revoke-remote-login

Revoke permission for a remote ship to |link your dojo.

Arguments

The ship whose permission you wish to revoke.

ship

Example

~zod:dojo> :dojo|allow-remote-login ~bus
>=
~zod:dojo> :dojo|acl
>=
{~bus}
> :dojo|revoke-remote-login ~bus
>=
> :dojo|acl
>=
{}

Connect a local or remote CLI app.

Note a ship's moons can automatically link its dojo, but other ships require explicit permission with :dojo|allow-remote-login.

Arguments

ship term

The ship is optional, it's only necessary if the app is on a remote ship. The term is mandatory, and is the name of the CLI app to connect.

Example

Connect to the dojo on a remote ship (this is only possible if you have permission):

|link ~sampel-palnet %dojo
>=
[linked to [p=~sampel-palnet q=%dojo]]
~sampel-palnet:dojo>

Connect to the %chat-cli app locally:

|link %chat-cli
>=
[linked to [p=~zod q=%chat-cli]]
~zod:chat-cli/

Note you can cycle between CLI apps with Ctrl+x. You can disconnect a CLI app with the |unlink command.


Disconnect a local or remote CLI app.

Arguments

ship term

The ship is optional, it's only necessary if the app is on a remote ship. The term is mandatory, and is the name of the CLI app to disconnect.

Example

Disconnect the local %chat-cli app:

> |unlink %chat-cli
>=
[unlinked from [p=~zod q=%chat-cli]]

Disconnect from a remote dojo session:

> |unlink ~sampel-palnet %dojo
>=
[unlinked from [p=~sampel-palnet q=%dojo]]

Developer tools

These tools are mostly useful to developers or similarly technical people.

.

Make a jamfile and write to disk. A noun is jammed and then written to pier/.urb/put/path/extension using a %sag %blit, saving it as a jamfile.

Arguments

path/extension noun

Example

This command is often used for writing pills to disk - see e.g. +solid.

> .solid/pill +solid %base

You can also jam arbitrary nouns, e.g.

> .decrement/atom [8 [1 0] 8 [1 6 [5 [0 7] 4 0 6] [0 6] 9 2 [0 2] [4 0 6] 0 7] 9 2 0 1]

This is the Nock formula for decrement. If you copy it from /pier/.urb/put/decrement.atom to pier/base then you can run it by scrying it from Clay and running +cue to reobtain the formula.

> .*(100 (cue .^(@ %cx %/decrement/atom)))
99

@

Write atom to a file in binary.

Arguments

path @

Example

> `@test/atom 123`

will create a file called test.atom in pier/.urb/put/test.atom. The contents of this file is a binary representation of the atom, 1111011.

+ames-flows

Print details of Ames flows by ship.

Arguments

This argument is optional:

@ud

If no argument is provided, it will print details of Ames flows for all ships, sorted by the number of flows. If a number n is provided as an argument, it'll only print the top n results.

Example

All flows:

> +ames-flows
~[
[ ship=~mister-dister-dozzod-dozzod
open=[out-open=3 out-closing=0 in=0 nax=0]
corked=0
]
[ship=~nec open=[out-open=1 out-closing=0 in=0 nax=0] corked=0]
[ ship=~dister-dozzod-dozzod
open=[out-open=1 out-closing=1 in=0 nax=0]
corked=0
]
[ ship=~lander-dister-dozzod-dozzod
open=[out-open=1 out-closing=0 in=0 nax=0]
corked=0
]
]

Top 2 ships:

> +ames-flows 2
~[
[ ship=~mister-dister-dozzod-dozzod
open=[out-open=3 out-closing=0 in=0 nax=0]
corked=0
]
[ship=~nec open=[out-open=1 out-closing=0 in=0 nax=0] corked=0]
]

|ames-prod

Reset congestion control; re-send packets immediately.

Ames uses a backoff algorithm for congestion control. This can be inconvenient when debugging in certain cases, you may have to wait a couple of minutes before an unacknowledged packet is re-sent. This generator resets congestion control, causing at least one pending packet to be immediately re-sent for each flow.

Arguments

ship ship ship ...

If no argument is given, congestion control will be reset for all flows. Otherwise, you can specify a number of ships, and congestion control will only be reset for flows to those ships.

Example

> |ames-prod
>=
> |ames-prod ~bus ~wex
>=

|ames-sift

Filter Ames debug printing by ship.

This filters the output controlled by |ames-verb.

Arguments

ship ship ship ....

If no argument is given, filtering is disabled. Otherwise, Ames debug printing will be filter to only include the specified ships.

Example

Enable filtering:

> |ames-sift ~nec ~bus
>=

Disable filtering:

> |ames-sift
>=

|ames-snub

Blacklist/whitelist ships in Ames.

All packets from either the blacklisted ships or all non-whitelisted ships (as the case may be) will be dropped.

Arguments

?(%allow %deny) ship ship ship ship ....

(Either %allow or %deny then a list of ships.)

  • %allow or %deny set whether the following ships are a whitelist or blacklist.

Note that while %deny is ordinary blacklist blocking, %allow means any ships not on the list will be blocked.

Note also that this generator totally overrides existing snub settings - it doesn't just add or remove ships from an existing list.

Example

Create a blocklist:

> |ames-snub %deny ~wet ~sampel ~sampel-palnet
>=

Create a whitelist (and therefore block everyone else):

> |ames-snub %allow ~wet ~sampel ~sampel-palnet
>=

+ames-timers

Print Ames message-pump timers by ship.

Arguments

@ud

If no argument is provided, it will print details of Ames timers for all ships, sorted by the number of timers. If a number n is provided as an argument, it'll only print the top n results.

Example

Print all the Ames timers for all ships:

> +ames-timers
~[
[~.~mister-dister-dozzod-dozzod 3]
[~.~dister-dozzod-dozzod 2]
[~.~lander-dister-dozzod-dozzod 1]
]

Print the top two ships:

> +ames-timers 2
~[[~.~mister-dister-dozzod-dozzod 3] [~.~dister-dozzod-dozzod 2]]

|ames-verb

Enable verbose Ames debug printing.

Arguments

verb verb verb...

A verb:ames is one of %snd %rcv %odd %msg %ges %for %rot. Each one enables printing of different kinds of events. You can enable as many as you want at one time. If |ames-verb is given no argument, it disables all Ames debug printing.

For details of the meaning of these verbs, see its entry in the Ames Data Types documentation.

Example

> |ames-verb %msg
>=
> |hi ~nec
>=
ames: ~nec: plea [[~zod 1] [~nec 1] bone=[0 %g /ge/hood]]
> |ames-verb
>=

|ames-wake

Clean up Ames timers.

Set timers for Ames flows that lack them, cancel timers for Ames flows that have them but shouldn't.

Example

> |ames-wake
>=

+brass

Build a brass pill.

A brass pill is a complete bootstrap sequence that recompiles the vanes, unlike a +solid pill which does not.

Arguments

%base-desk %extra-desk-1 %extra-desk-2 ...

The first argument is the desk to be used as "base", containing the kernel etc. Any extra desks are optional.

The base desk may alternatively be specified as a path to a /sys directory including the path prefix like /=some-desk=/foo/bar/sys. In that case, the path prefix from that path will be used to determine the base desk. This is only useful if you want the start-up events in the pill to use an alternative compiler or Arvo source.

Example

Export a brass pill containing just the %base desk:

> .brass/pill +brass %base
%brass-parsing
%brass-parsed
%brass-compiling
%brass-compiled
[%user-files 420]

The pill will now be available in <pier>/.urb/brass.pill in the host filesystem.

Export a brass pill with multiple desks:

> .brass/pill +brass %base %landscape %webterm
%brass-parsing
%brass-parsed
%brass-compiling
%brass-compiled
[%user-files 128]
[%user-files 93]
[%user-files 420]

-build-cast

Build a static mark conversion gate.

Arguments

path

The path is of the format %/from-mark/to-mark. It must being with the path prefix denoting the desk that contains the specified mark files.

Example

> =tape-to-json -build-cast %/tape/json
> (tape-to-json "foo")
[%s 'foo']

-build-file

Build a Hoon file.

Arguments

path

The path points to a Hoon file in Clay. It must begin with the path prefix.

Example

> =numbers -build-file %/lib/number-to-words/hoon
> (to-words:eng-us:numbers 42)
[~ "forty-two"]

-build-mark

Build a dynamic mark core.

A dynamic mark core is one that deals with vases rather direct values. Its type is a dais:clay.

Arguments

path

The path is a path prefix followed by the mark, like %/txt. The mark in question must exist in the desk specified by the prefix.

Example

> =txt-dais -build-mark %/txt
> !< (urge:clay cord) (~(diff txt-dais !>(~['foo' 'bar'])) !>(~['foo' 'baz']))
~[[%.y p=1] [%.n p=<|bar|> q=<|baz|>]]

-build-nave

Build a static mark core.

A static mark core is one that deals with values directly rather than vases. Its type is a nave:clay.

Arguments

path

The path is a path prefix followed by the mark, like %/txt. The mark in question must exist in the desk specified by the prefix.

Example

> =txt-nave -build-nave %/txt
> (diff:txt-nave ~['foo' 'bar' 'baz'] ~['foo' 'zoo' 'baz'])
~[[%.y p=1] [%.n p=<|bar|> q=<|zoo|>] [%.y p=1]]

-build-tube

Build a dynamic mark conversion gate.

A dynamic mark conversion gate is one that deals with vases rather that plain nouns. Its type is a tube:clay.

Arguments

path

The path is of the format %/from-mark/to-mark. It must being with the path prefix denoting the desk that contains the specified mark files.

Example

> =txt-mime-tube -build-tube %/txt/mime
> !< mime (txt-mime-tube !>(~['foo']))
[p=/text/plain q=[p=3 q=7.303.014]]

+dbug

Query the state or bowl of a running agent.

Arguments

See the dbug section of App School lesson 3 for details of usage.

Example

This is only used with an :agent, not by itself.

> :graph-store +dbug [%state '(~(got by graphs) ~zod %dm-inbox)']
>=
> [p={} q=[~ %graph-validator-dm]]

|gall-sear

Clear pending move queue from a ship.

Arguments

ship

The ship from which queued moves should be cleared.

Example

> |gall-sear ~nec
>=

|gall-sift

Set Gall verbosity by agent.

This filters the debug output toggled by |gall-verb.

Arguments

%agent1 %agent2 %agent3....

If agents are specified, debug prints will be filtered to only those agents. If no arguments are given, filtering will be disabled.

Example

Filter to just these agents:

> |gall-sift %graph-store %dojo
>=

Disable filtering:

> |gall-sift
>=

|gall-verb

Toggle Gall debug printing.

Arguments

%odd

If the %odd argument is provided, Gall will print debug information about errors like duplicate %watch acks, subscriptions closing due to an agent crashing on a %fact, etc.

If no argument is given, such debug printing will be disabled.

Example

Turn on error messages:

> |gall-verb %odd
>=

Turn off error messages:

hi ~nec successful
> |gall-verb
>=

|pass

Pass a task to a vane.

Warning

This is a powerful command and has the potential to break things if you're not careful.

Arguments

note-arvo

A note-arvo is defined in lull.hoon as:

+$ note-arvo
$~ [%b %wake ~]
$% [%a task:ames]
[%b task:behn]
[%c task:clay]
[%d task:dill]
[%e task:eyre]
[%g task:gall]
[%i task:iris]
[%j task:jael]
[%k task:khan]
[%$ %whiz ~]
[@tas %meta vase]
==

It's a vane letter (%a for Ames, %b for Behn, etc) followed by one of that vane's tasks.

Note that you can't receive any gifts in response.

Example

Run -hi our "foo" via Khan:

> |pass [%k %fard %base %hi noun+!>([~ our "foo"])]
>=
< ~zod: foo

Pass a %text task to Dill:

> |pass [%d %text "foo"]
>=
foo

-read

Read a file, local or remote.

While +cat can only read text files, the -read thread can read any kind of file, directory or desk on any ship it has permission to read. This thread doesn't pretty-print the result like +cat, it just produces the data.

-read isn't limited to ordinary file reads, but can make requests using any care. Some cares might be useful, such as %u to check file existence. Others have obscure technical uses. The most common is %x, which is a normal read.

Arguments

care ship desk case path
  • care: One of %a %b %c %d %e %f %p %r %s %t %u %v %w %x %y %z, denoting a Clay submodule. For details of their meaning, see the Clay data types documentation and Clay scry reference.
  • ship: The target ship like ~sampel, or our for the local ship.
  • desk: The desk on that ship like %base.
  • case: The revision you're requesting. This can be one of:
    • ud+123 - A revision number.
    • da+now - The revision at that date-time. You can use now for the most recent or an @da for another time.
    • tas+foobar: A revision label, these are rarely used.
  • path: The filepath like /gen/code/hoon. Note the Clay path prefix is not included since that data was specified separately.

Example

Read sys.kelvin in the %base desk on the local ship at the current revision:

> -read %x our %base da+now /sys/kelvin
kel=[lal=%zuse num=418]

Check for the existence of that same file:

> -read %u our %base da+now /sys/kelvin
%.y

|serve

Bind a generator to a URL path.

See the Eyre Guide for details of writing web-facing generators.

Arguments

path desk path

The first path is the URL path to bind like /foo/bar/baz. The second path is the path to the generator in desk like /gen/who/hoon (note it does not include the path prefix).

Example

Bind /gen/who/hoon in the %base desk to the /who URL path:

> |serve /who %base /gen/who/hoon
>=
bound: %.y

In a Unix terminal, try requesting it:

> curl http://localhost:8080/who
{"who":"zod"}

+solid

Build a solid pill.

A solid pill is a partial +brass pill, it doesn't recompile the vanes and so boots faster. It is intended for development purposes, not production.

Arguments

%base-desk %extra-desk-1 %extra-desk-2 ...

The first argument is the desk to be used as "base", containing the kernel etc. Any extra desks are optional.

The base desk may alternatively be specified as a path to a /sys directory including the path prefix like /=some-desk=/foo/bar/sys. In that case, the path prefix from that path will be used to determine the base desk. This is only useful if you want the start-up events in the pill to use an alternative compiler or Arvo source.

Example

Export a solid pill containing just the %base desk:

> .solid/pill +solid %base
%solid-start
%solid-loaded
%solid-parsed
%solid-arvo
[%solid-kernel 0x7c8c.3271]
lull: ~daptyl-fodsen
zuse: ~hadmel-rigrel
vane: %ames: ~podmex-soldef
vane: %behn: ~sartes-masnyl
vane: %clay: ~haptyv-natnev
vane: %dill: ~tindus-rabrys
vane: %eyre: ~wolsem-milsup
vane: %gall: ~folbex-mapfur
vane: %iris: ~macryl-midnyl
vane: %jael: ~molpec-rolhus
vane: %khan: ~mosryp-donleg
[%user-files 420]

The pill will now be available in <pier>/.urb/solid.pill in the host filesystem.

Export a solid pill with multiple desks:

> .solid/pill +solid %base %landscape %webterm
%solid-start
%solid-loaded
%solid-parsed
%solid-arvo
[%solid-kernel 0x5ee.3781]
lull: ~daptyl-fodsen
zuse: ~hadmel-rigrel
vane: %ames: ~podmex-soldef
vane: %behn: ~sartes-masnyl
vane: %clay: ~haptyv-natnev
vane: %dill: ~tindus-rabrys
vane: %eyre: ~wolsem-milsup
vane: %gall: ~folbex-mapfur
vane: %iris: ~macryl-midnyl
vane: %jael: ~molpec-rolhus
vane: %khan: ~mosryp-donleg
[%user-files 128]
[%user-files 93]
[%user-files 420]

-test

Run tests for a library.

Arguments

(list path)

Each path is a path to a file to test, and must include the path prefix.

Example

Refer to the Unit Test Guide for details of using the -test thread.


+timers

Print out currently running Behn timers.

Examples

> +timers
~[
[ date=~2022.9.25..10.54.36..ac0c
duct=~[/ames/pump/~pocwet/0 /ames]
]
[date=~2022.9.25..10.54.36..af7c duct=~[/ames/pump/~wet/8 /ames]]
[date=~2022.9.25..10.54.36..b166 duct=~[/ames/pump/~nus/4 /ames]]
[date=~2022.9.25..10.54.36..b3cf duct=~[/ames/pump/~wet/4 /ames]]
.....(truncated for brevity).....

Filesystem (Basic)

These are basic tools for things like copying files, navigating directories, etc.

+cat

Read a file at the given location and print its contents in the dojo.

If the specified path points to a directory rather than file, it will list the files in that directory like the +ls command documented below.

+cat can only print text-based files like .hoon source-code, .txt, .html, etc. It won't work for binary blobs or other non-text files.

Arguments

The path is mandatory, the vane is optional.

path, =vane ?(%c %g)

The past must include a path prefix.

It can query Gall agents rather than Clay files if the optional , =vase %g argument is given. In that case, it will perform a %gx scry to the given scry path. The type returned must be some kind of text file, either a @t or a wain (a (list @t)). Most agents do not have scry endpoints that produce text files so the %g feature is rarely useful.

Example

Read a hoon file:

> +cat %/gen/cat/hoon
/~zod/base/~2022.9.4..11.01.12..c392/gen/cat/hoon
:: ConCATenate file listings
::
:::: /hoon/cat/gen
::
/? 310
/+ pretty-file, show-dir
::
::::
::
:- %say
|= [^ [arg=(list path)] vane=?(%g %c)]
=- tang+(flop `tang`(zing -))
.......(truncated for brevity)..........

List the files in a directory:

> +cat %/sys/vane
* /~zod/base/~2022.9.4..11.02.01..5b0a/sys/vane
ames/hoon
behn/hoon
clay/hoon
dill/hoon
eyre/hoon
gall/hoon
iris/hoon
jael/hoon
khan/hoon

|cp

Copy a file.

Arguments

The first path is to the file and the second is where to copy it.

input=path output=path

Both the input and output paths must include the full path prefix.

The output path must end with an explicit filename and mark, you can't just point it at a directory.

Example

Copy the code.hoon generator to the root of %base with the name foo.hoon:

> |cp %/gen/code/hoon %/foo/hoon
>=
+ /~zod/base/9/foo/hoon

Let's list the files in the root of %base:

> +ls %
app/
desk/bill
foo/hoon <- new file with contents of %/gen/code/hoon
gen/
lib/
mar/
sur/
sys/
ted/

=dir

Change working directory.

Note this is not a generator or thread as are most other tools documented. Rather, it is a special command built directly into the dojo.

Arguments

path

The path must include the path prefix.

If no path is specified, it will switch back to the default location (the root of the %base desk at its most recent revision).

Example

Let's try changing to the root of the %landscape desk:

> =dir /=landscape=
=% /~zod/landscape/~2022.9.4..13.15.48..5e81

The dojo prompt will now look like:

~zod:dojo/=/landscape/~2022.9.4..13.15.48..5e81>

% and /=== now resolve to this location, so any commands like +ls %, +tree %, etc, will be run against this location.

The working directory doesn't need to be the root of a desk, you can also do =dir /=base=/gen/hood, etc.

If you specify a different case in the path prefix like =dir /=base/1, you will switch to that revision.

To switch back to the default location (the root of the %base desk at its most recent revision), you just run =dir without an argument.


+ls

List files and directories at the specified location.

Arguments

The path is mandatory, the vane is optional:

path, =vane ?(%c %g)

The path must include the path prefix.

The default behavior of +ls is to query Clay, but Gall agents can also be queried by specifying the optional =vane %g argument like +ls /=some-agent=/foo/bar, =vane %g. This will perform a scry of the form .^(arch %gy /=some-agent=/foo/bar). Very few Gall agents implement %y scry endpoints that produce arch types, so this feature is almost entirely useless.

Example

> +ls %/sys/vane
ames/hoon
behn/hoon
clay/hoon
dill/hoon
eyre/hoon
gall/hoon
iris/hoon
jael/hoon
khan/hoon

Note the mark (file type/extension) is separated with a / rather than a . as is common in other systems: hoon is not a sub-directory of ames here, it is the mark. Directories can be distinguished from files by their lack of a mark; they'll just look like app/.


+mv

Move a file from one location to another.

Arguments

The first path is to the file and the second is where to move it.

input=path output=path

Both paths must include the path prefix.

The output path must end with an explicit filename and mark, you can't just point it at a directory.

Example

Create a file:

> *foo/txt ~['foo' 'bar' 'baz']
+ /~zod/base/16/foo/txt

Move it:

> |mv %/foo/txt %/bar/txt
>=
- /~zod/base/17/foo/txt
+ /~zod/base/17/bar/txt

|rm

Delete a file.

Note you cannot delete a directory, but a directory will be disappear once all its files are gone.

Arguments

path

The path must include the path prefix.

Example

Create a file:

> *foo/txt ~['foo' 'bar' 'baz']
+ /~zod/base/22/foo/txt

Delete it:

> |rm %/foo/txt
>=
- /~zod/base/23/foo/txt

+tree

Display all files in the given directory and its sub-directories.

Arguments

path

The path must include the path prefix.

Example

> +tree %/sys
/sys/arvo/hoon
/sys/hoon/hoon
/sys/kelvin
/sys/lull/hoon
/sys/vane/ames/hoon
/sys/vane/behn/hoon
/sys/vane/clay/hoon
/sys/vane/dill/hoon
/sys/vane/eyre/hoon
/sys/vane/gall/hoon
/sys/vane/iris/hoon
/sys/vane/jael/hoon
/sys/vane/khan/hoon
/sys/zuse/hoon

Filesystem (Advanced)

These are more advanced desk and filesystem tools.

|autocommit

Enable automatic commits for a mounted desk.

Auto-commits can be disabled with |cancel-autocommit.

Arguments

desk

Example

In the dojo:

> |mount %landscape
>=
> |autocommit %landscape
>=

In a separate Unix shell session:

echo "foo" > ~/piers/zod/landscape/foo.txt

Back in the dojo:

+ /~zod/landscape/8/foo/txt

|cancel-autocommit

Cancel automatic commits for all mounted desks.

Note this will cancel automatic commits for all desks, it's not possible to target a single desk.

Examples

> |cancel-autocommit
>=

|commit

Commit changes to mounted desk.

Arguments

desk, =auto ?

The desk is mandatory, the =auto is optional.

If =auto is .y, auto-commits will be enabled, meaning changes to that desk on the host side will automatically be committed as soon as they happen.

Auto-commits can be disabled with |cancel-autocommit.

Example

In the dojo:

> |mount %landscape
>=

In a separate Unix shell session:

echo "foo" > ~/piers/zod/landscape/foo.txt

Back in the dojo:

> |commit %landscape
>=
+ /~zod/landscape/6/foo/txt

|fuse

Perform an octopus merge.

A %fuse request in Clay replaces the contents of %destination-desk with the merge of the specified beaks according to their merge strategies. This has no dependence on the previous state of %dest so any commits/work there will be overwritten.

|fuse extends this concept with the idea of a tracked source. When specifying beaks to include in your fuse, specify %track instead of a case. This will tell |fuse to retrieve the latest version of the source beak and to rerun the %fuse request whenever that tracked source changes. A fuse can have many tracked sources, or none. The base may be tracked as well.

Arguments

Either:

desk %cancel

Or:

desk path [germ path] [germ path]..., =overwrite ?

The first argument is the target desk that will be overwritten. After that is either %cancel to cancel an existing tracked fuse, or else a path followed by a series of [germ path]. The first path is a beak like /~zod/foo/track or /~zod/foo/5, and is the base of the octopus merge. For the remaining [germ path], the germ is the merge strategy (for details run |merge without arguments and read the help text it prints), and the path is another beak.

The optional =overwrite flag allows you to overwrite a currently ongoing fuse. Without this flag, attempting a fuse into a desk that you already |fuse'd into will error.

For usage details, you can run |fuse without arguments and it'll print out a help text.

Examples

|fuse %dest /=kids= mate+/~nel/base= meet+/~zod/kids/track
|fuse %old-desk /=kids= only-that+/~nus/test=, =overwrite &
|fuse %desk-to-cancel-fuse-into %cancel

|fuse-list

Print tracked fuse sources for a desk.

See the |fuse command for details.

Example

> |fuse-list %base
>=
no ongoing fuse for %base

|label

Add a label to a desk revision.

Labels let you name particular commits, and then refer to them by that name rather than date or revision number.

Arguments

desk term, =aeon @ud

The desk and term are mandatory, the =aeon is optional. The term is the label to give the revision. If an aeon is not specified, it will default to the most recent revision.

Example

> |label %base %foo
>=
labeled /~zod/base/foo
> |label %base %bar, =aeon 1
>=
labeled /~zod/base/bar
> =< lab .^(dome:clay %cv %)
{[p=%bar q=1] [p=%foo q=9]}
> .^(? %cu /=base/bar/gen/code/hoon)
%.y

|merge

Merge one desk into another.

Arguments

desk ship desk, =cas case, =gem ?(germ %auto)

The first desk is the local merge target. The second desk is the merge source on the specified ship. The optional =cas argument specifies a particular case (revision reference) like ud+5, da+now, etc. The optional =gem argument specifies a merge strategy. The default merge strategies is %auto, which does a fast-forward %fine merge if the target desk exists, and creates a new desk with %init if not.

For details of usage and all the different merge strategies, run |merge without arguments for a help text.

Example

> |merge %bitcoin ~bus %bitcoin, =gem %only-this
>=
merged with strategy %only-this

|mount

Mount a desk or directory to the host filesystem.

Arguments

A whole desk:

desk

A directory:

path

If it's a path, it must include the full path prefix.

Note you can't mount a single file directly.

Example

Mount the whole %base desk:

> |mount %base
>=

The desk is now accessible at <pier>/base in the host filesystem.

Mount the /gen directory of the %base desk:

> |mount %/gen
>=

The /gen directory is now accessible at <pier>/gen in the host filesystem.


|new-desk

Create a new desk either from a blank template or from an existing desk.

Arguments

desk, =from desk, =hard ?, =gall ?

The first desk is the name of the desk to be created. The optional =from is the source desk if present. The optional =hard specifies whether to overwrite an existing desk of the same name. The optional =gall specifies whether to include common Gall support files like /lib/skeleton.

Example

Create a new desk:

> |new-desk %aa
>=

The desk is now created in Clay.

Create a new desk from the %base desk:

> |new-desk %pahoehoe, =from %base
>=

The desk is now created in Clay and filled with the contents of %base. (Note that you would want to clear the desk.bill file or never |install such a desk, since the %base agents would be erroneously superseded.)

Create a new desk, overwriting any existing desk and including useful Gall files:

> |new-desk %aa, =hard &, =gall &
>=
+ /~zod/aa/2/lib/default-agent/hoon
+ /~zod/aa/2/mar/bill/hoon
+ /~zod/aa/2/lib/skeleton/hoon
+ /~zod/aa/2/mar/json/hoon
+ /~zod/aa/2/lib/dbug/hoon
+ /~zod/aa/2/mar/mime/hoon

The desk is now created in Clay.


|norm

Add a tombstone policy rule.

Note that the policy will not be automatically applied when set, you'll need to run |pick for the garbage collection to occur.

Arguments

ship desk path keep=?

The path is to a file or directory on the given desk on the given ship. The ? is .n if it should be tombstoned, .y if it should be kept.

Examples

> |norm our %bitcoin /gen .n
>=
> |norm our %bitcoin /app .y
>=
> |norm our %webterm / .n
>=
> |norm our %webterm /gen .y
>=
> +norms
~tus/%bitcoin:
/app: %.y
/gen: %.n
~mister-dister-dozzod-dozzod/%bitcoin:
~tus/%base:
~tus/%webterm:
/gen: %.y
/: %.n
~tus/%kids:
~mister-dister-dozzod-dozzod/%webterm:
~tus/%landscape:
~mister-dister-dozzod-dozzod/%landscape:

+norms

Print tombstone policies for all desks.

Example

> +norms
~tus/%bitcoin:
/app: %.y
/gen: %.n
~mister-dister-dozzod-dozzod/%bitcoin:
~tus/%base:
~tus/%webterm:
/gen: %.y
/: %.n
~tus/%kids:
~mister-dister-dozzod-dozzod/%webterm:
~tus/%landscape:
~mister-dister-dozzod-dozzod/%landscape:

%.y means old revisions of the file or directory will be kept, %.n means they'll be tombstoned.


|pick

Apply tombtoning policies; collect garbage.

Example

> |pick
>=

|private

Make a desk, directory or file private (prevent remote ships from reading it).

Note that if a desk or directory is publicly readable, making any directories or files inside of it private will prevent remote ships from syncing the entire desk/directory. They'll still be able to read the individual parts that aren't private though, just not the whole thing.

Desks, files and directories can be made publicly readable again with |public.

Arguments

desk path

The desk is mandatory, the path is optional. If specified, the path is a directory or file in the given desk.

Example

> |private %landscape
>=
> |private %base /ted/dns
>=

|public

Make a desk, directory or file publicly readable (allow remote ships to read it).

Things can be made private again with |private.

Arguments

desk path

The desk is mandatory, the path is optional. If specified, the path is a directory or file in the given desk.

Example

> |public %landscape
>=
> |public %base /ted/dns
>=

|story-init

Create a new story file (commit message log) for a desk.

Arguments

All arguments are optional:

, =desk desk, =overwrite ?

If no desk is given, the current desk will be used (typically %base). Otherwise, the specified =desk will be used. If =overwrite is .y, any existing story file in the desk will be overwritten with a blank one.

Example

> |story-init
>=
+ /~tus/base/7/story
> |story-init, =desk %landscape, =overwrite .y
>=
+ /~tus/landscape/2/story

+story-list

Print out a desk's story (commit messages), unordered.

Arguments

, =desk

If the optional =desk argument is not specified, it'll infer the current desk (typically %base).

Example

> +story-list, =desk %landscape
commit: 0v10.blbfu.8a414.qrjqo.ov847.gc6v7.6dpob.49i6s.ndi49.ve74j.a04qr
some title
some body
|||
aaaaaaaaa
bbbbbbb
---

+story-read

Print out a desk's story (commit messages) in order.

Arguments

, =desk desk

If the optional =desk argument is provided, it'll print out the story for that desk. If no argument is provided, it'll infer the current desk (typically %base).

Example

> +story-read, =desk %landscape
commit: 0v10.blbfu.8a414.qrjqo.ov847.gc6v7.6dpob.49i6s.ndi49.ve74j.a04qr
some title
some body

|story-remove

Remove commit message(s) for a given commit from a desk's story.

Arguments

cash, =desk desk, =prz prose

A cash is either a case like ud+2, da+now, etc, or a [%tako tako:clay] commit reference. If the optional =desk argument is not given, it'll infer the current desk (typically %base). The optional =prz argument is a prose, which is [title=@t body=@t]. If =prz is given, only that specific prose will be removed from the messsages of the specified commit.

Example


|story-write

Add a commit message to a desk's story.

Note that you can run this more than once to add multiple messages to the same commit.

Arguments

title=@t body=@t, =desk desk, =cas cash

Only the title is mandatory. If the =desk argument is not provided, it'll infer the current desk (typically %base).

The optional =cas may either be a case like da+now, ud+2, etc, or else a [%tako tako:clay] commit reference. If a =cas is not provided, it'll default to the most recent.

Example

> |story-write 'some title' 'some body', =desk %landscape, =cas ud+1
>=
: /~tus/landscape/3/story
> +story-read, =desk %landscape
commit: 0v10.blbfu.8a414.qrjqo.ov847.gc6v7.6dpob.49i6s.ndi49.ve74j.a04qr
some title
some body

|sync

Continuously merge into local desk from another local or remote desk.

Every change on the source desk will be merged into the local one. This tracking can be stopped with |unsync.

Arguments

desk ship desk

The first desk is the local target, the second is the source on the specified ship.

Example

> |sync %webterm ~bus %webterm
>=
kiln: finding ship and desk from %webterm on ~bus to %webterm
kiln: activated sync from %webterm on ~bus to %webterm
kiln: beginning sync from %webterm on ~bus to %webterm
kiln: sync succeeded from %webterm on ~bus to %webterm

|syncs

List currently active desk syncs.

Example

> |syncs
>=
kiln: sync configured from %webterm on ~bus to %webterm

|tomb

Tombstone a file at a particular revision.

Tombstoning means deleting a file's data in an old revision in Clay, only leaving the file reference.

This can only tombstone a single file, it cannot recursively tombstone a directory. If a directory is specified, it will fail.

The desk revision number specified cannot be the current revision, it must be an old one. This will only tombstone the file at the specified revision, not any revisions before it.

Note this will also execute any other unapplied tombstone policies as it sends Clay a %pick garbage collection task.

Arguments

path, =dry ?

The path is mandatory, it's a path to a file including the full path prefix. If the optional =dry argument is .y, it will perform a dry run and not actually tombstone the file.

Examples

> -read %x our %base ud+3 /foo/txt
bar
> |tomb /=base/3/foo/txt
>=
tomb: [~tus %base /foo/txt 0vr.46d5h.ocj13.age48.mnpnd.567me.1f6uc.9haq8.5ihru.b302i.agt4c [fil=~ dir={}] /foo/txt]
> -read %x our %base ud+3 /foo/txt
(fail)

|unmount

Unmount a previously mounted desk or directory.

Note that any uncommitted changes on the host side will be discarded.

Arguments

term

If the thing you're unmount is a desk, you'll just specify the desk name. If it's a sub-directory of a desk, you must specify the mount-point, which is whatever the directory is called in the host filesystem. For example, if you mounted %/gen and it's at <pier>/gen, you'd specify %gen here.

Example

Unmount the %base desk:

> |unmount %base
>=

|unsync

Stop syncing a desk with another.

Arguments

desk ship desk

The first desk is the local one receiving updates, the second desk is the source for updates on the specified ship.

Example

> |unsync %webterm ~bus %webterm
>=
kiln: ended autosync from %webterm on ~bus to %webterm

Miscellaneous

Miscellaneous utilities.

+hello

Hello, world.

Arguments

term

Example

> +hello %foo
'hello, foo'

+help

Display information about generators.

Arguments

generator

Examples

Show help message for all generators in %base:

+help

Show help message for a specific generator in %base:

+help 'help'
+help %help

|hi

Ping another ship with an optional message.

The hi and message will be displayed in that ship's dojo. This is useful for testing connectivity.

Arguments

ship tape

The target ship is mandatory, the tape is an optional message.

Example

Without a message:

:: in ~zod's dojo:
> |hi ~bus
>=
hi ~bus successful
:: in ~bus's dojo:
< ~zod:

With a message:

:: in ~zod's dojo:
> |hi ~bus "hello"
>=
hi ~bus successful
:: in ~bus's dojo:
< ~zod: hello

Print out the sponsor of this ship.

Examples

> +sponsor
~zod

+keys

Print the life (key revision number) and rift (continuity number aka factory reset number) for a ship.

Arguments

ship

Example

> +keys our
[life=[~ 1] rift=[~ 1]]
> +keys ~sampel-palnet
[life=[~ 1] rift=[~ 1]]

Moons

These tools are for spawning and managing moons.

|moon

Spawn a new moon.

Arguments

ship, =public-key pass

All arguments are optional. If the ship is not specified, it'll spawn a random moon. If it's specified, it will spawn the given moon.

If =public-key is specified, it'll configure the moon with the given public key rather than generating a new key pair. This is useful if your planet has breached and forgotten about its moon.

If spawning a new moon, it will spit out the moon's private key, a long code which looks like 0wn6bMe.l1....... You can copy this and save it in a .key file, then give the key file as an argument to the runtime when booting the moon like:

urbit -w sampel-sampel-sampel -k my-moon.key

You can also give the runtime the key directly by using -G rather than -k.

Example

Spawn a random moon:

> |moon
>=
moon: ~maglys-filted-dozzod-dozbus
0wn6bMe.l1~4K.KDRwj.rJMO1.4Km4h.xqXPo.0MNPP.HjyJF.5y6yc.vMYuc.6ZLW~.JOfLa.nVCm2.VH7sl.xTDAE.inSBu.EL7M5.gx0y0.1NPYe.57000.0mTU1

Spawn a specific moon:

> |moon ~sampel-dozzod-dozbus
>=
moon: ~sampel-dozzod-dozbus
0w1p.ihqFP.tIP1f.BhPf3.DLZDr.MomhE.~NyqB.wpkPN.KiYhA.rkTbo.OApoe.V0AIx.NI2-Q.Y-vBU.aKOMW.NwagX.iML~Q.mjFzE.g6w0s.oTw00.0mOU1

Register an existing moon with the given public key:

|moon ~sampel-dozzod-dozbus, =public-key 0w8H.oarut.wDiYO.P~5KZ.PFFtm.jpOVa.k2n6r.hsbbN.fBi9w.L4ftw.wlajH.-exB5.BdaRC.EVfD1.zfR~f.e73-W.KtaY-.Qdchy
>=

|moon-breach

Breach (factory reset) a moon.

This is run on the moon's parent planet. Note that breaching a moon will require to you boot it from scratch with its original keys. Breaching a moon, unlike a planet, will not change its keys. If you no longer have its original keys you'll also need to run |moon-cycle-keys to generate new ones.

Arguments

ship, =rift @ud

The ship is mandatory, it's the moon to breach. The =rift is optional, it's the continuity number (factory reset number). You'd specify a =rift if you'd factory reset the parent planet and need to skip ahead to a particular rift to match the existing moon. Note you can't turn the rift backwards, only forwards.

Example

> +keys ~lisret-namdev-ralnup-ribsyr
[life=[~ 1] rift=[~ 0]]
> |moon-breach ~lisret-namdev-ralnup-ribsyr
>=
> +keys ~lisret-namdev-ralnup-ribsyr
[life=[~ 1] rift=[~ 1]]
> |moon-breach ~lisret-namdev-ralnup-ribsyr, =rift 5
>=
> +keys ~lisret-namdev-ralnup-ribsyr
[life=[~ 1] rift=[~ 5]]

|moon-cycle-keys

Change the keys of a moon.

This is run on the moon's parent. Once you've cycled the moon's keys on its parent, you'll need to run |rekey on the moon itself with the new keys that are printed.

Arguments

ship, =life life, =public-key pass

The ship is mandatory, it's the moon to rekey. The =life and =public-key are optional.

You'd only specify a =life if you needed to jump ahead to a particular key revision. You'd only specify a =public-key if you need the moon to have a particular public key. The only time you'd need either of these optional arguments is if you've breach the moon's planet and need to get it back in sync with the existing moon. Note you can only go forward with the =life, not backwards.

Example

Change the keys for a moon:

> |moon-cycle-keys ~lisret-namdev-ralnup-ribsyr
moon: ~lisret-namdev-ralnup-ribsyr
0w1.Nqi99.2~xO3.XtTv8.PRR1N.j-Fxu.PqlYT.rgqdD.RVNCD.TQA9R.Chk-n.mKLsQ.oSgu1.6fc7j.8p7h1.BrKuE.5Wdc2.8j2h4

The long code beginning with 0w1.Nq... are its new private keys. You'd give that code to the |rekey command on the moon itself.

Rekey to a specific life (key revision):

> |moon-cycle-keys ~lisret-namdev-ralnup-ribsyr, =life 5
>=
moon: ~lisret-namdev-ralnup-ribsyr
0w2.FP28W.93aWD.FMyO-.j0z4e.x2cLA.bDnbB.OQNJY.A5DdJ.PbnzU.bAPVr.nb6uF.i1HvF.jQYwS.TDLJf.oVMr4.c-WyM.JLcm3

Rekey to a specific life and with a specific public key:

> |moon-cycle-keys ~lisret-namdev-ralnup-ribsyr, =life 10, =public-key 0w2.oLIwB.dH7BH.GCx3Y.ZQRZe.opK44.GK-HB.Mttqw.lz4FF.neRU3.SudC4.3l0we.UyMWg.dNmLx.rmT-i.SwZtg.nXy7o.wwzGC
>=

Spider

Tools for interacting with threads and Spider.

:spider|kill

Kill all running threads.

Example

> :spider|kill
>=

:spider|poke

Poke a running thread.

Arguments

@ta mark vase

The @ta is a thread ID of a running thread. The mark and vase are the data to poke the thread with.


:spider|start

Start a thread.

Arguments

term vase

The term is mandatory, it's the name of a thread in /ted in the current desk. The vase is optional, it's the start arguments for the thread if needed.

Note this tool looks for the thread in the current desk, so you'll have to change desk with =dir if you want to run one elsewhere.

Example

> :spider|start %hi !>([~ our "foo"])
>=
< ~zod: foo

:spider|stop

Stop a running thread.

Arguments

@ta

The @ta is a thread ID of a running thread.


+spider/tree

List all currently running threads.

Example

> +spider/tree
/eth-watcher--0v2j.5is08.v2ukg.8h6mr.evgt4.o86mf.p3ujf.l2teu.v6q3v.uk1fm.shrog.0pc5o.82tq1.skve4.22nu8.gkr9d.j4tvd.k8bdg.43cgs.rjcvr.eb6lv

System

System information and management tools.

|automass

Print memory reports periodically.

Automatic memory reports can be cancelled with |cancel-automass.

Arguments

@dr

A @dr is a relative time, for example ~s30, ~m5, ~h1, ~d1, ~d1.h1.m5.s30, etc.

Example

> |automass ~s30
>=

Thirty seconds later:

.....(truncated for brevity).....
total road stuff: B/376
space profile: KB/12.936
total marked: MB/176.019.156
free lists: MB/35.927.760
sweep: MB/176.019.156

(and every thirty seconds after)


|cancel-automass

Cancel periodic memory reports (enabled by |automass).

Example

> |cancel-automass
>=

+code

Print out your web login code.

Example

> +code
lidlut-tabwed-pillex-ridrup

|code

Change your web login code.

You'll be logged out of all existing web sessions when you change the code.

Note that Bridge won't be able to automatically derive your web login code if you change it.

Arguments

%reset

With the %reset argument, the web login code will be changed. With no argument, it'll just print out your existing code and code revision number.

Example

With no argument:

> |code
riddec-bicrym-ridlev-pocsef
current step=0
use |code %reset to invalidate this and generate a new code
>=

With the %reset argument:

> |code %reset
warning: resetting your code closes all web sessions
continue?
eyre: code-changed: throwing away cookies and sessions
>=
> |code
toppub-dosres-mirres-larpex
current step=1
use |code %reset to invalidate this and generate a new code
>=

-code

Print out your web login code (with leading ~).

Example

> -code
~lidlut-tabwed-pillex-ridrup

|cors-approve

Approve a CORS origin.

Arguments

@t

The argument is a cord containing the origin to approve.

Example

> |cors-approve 'http://example.com'
>=
> +cors-registry
[ requests={~~http~3a.~2f.~2f.localhost~3a.8081}
approved={~~http~3a.~2f.~2f.example~.com}
rejected={}
]
> |cors-approve 'http://localhost:8081'
>=
> +cors-registry
[ requests={}
approved
{ ~~http~3a.~2f.~2f.localhost~3a.8081
~~http~3a.~2f.~2f.example~.com
}
rejected={}
]

+cors-registry

Print approved, rejected and requested CORS origins.

Example

> +cors-registry
[ requests={~~http~3a.~2f.~2f.localhost~3a.8081}
approved={}
rejected={}
]

|cors-reject

Reject a CORS origin.

Arguments

@t

The argument is a cord containing the origin to reject.

Examples

> |cors-reject 'http://foo.com'
>=
> +cors-registry
[ requests={}
approved
{ ~~http~3a.~2f.~2f.localhost~3a.8081
~~http~3a.~2f.~2f.example~.com
}
rejected={~~http~3a.~2f.~2f.foo~.com}
]

-dns-address

Request a <ship>.arvo.network subdomain and configure SSL.

Note this only works for stars and planets. Note your ship must be accessible on port 80.

If successful, you'll be able to access your ship's web interface at https://<ship>.arvo.network.

Arguments

[%if @if]

The @if is a public IPv4 address in the format .x.x.x.x like .192.168.1.254.

Example

> -dns-address [%if .150.230.14.135]
dns: request for DNS sent to ~deg
dns: awaiting response from ~deg
dns: confirmed access via ralnup-ribsyr.arvo.network
0

|exit

Shut down this ship.

Example

> |exit
>=
%drum-exit
(ship is now shut down and you're back at the host shell)

|knob

Adjust vane error verbosity.

Note this only applies to %crud error messages that look something like:

crud: %foo event failed

Arguments

term ?(%hush %soft %loud)

The term is an error tag like %foo. The verbosity level for the specified tag may be one of:

  • %hush - Completely silent, print nothing.
  • %soft - Just print crud: %error-tag event failed, ignore any tang given in the %crud.
  • %loud - Print the %soft message as well as the full tang given in the %crud task.

Example

Loud:

> |knob %foo %loud
>=
> |pass [%d %crud %foo 'blah blah' ~]
>=
crud: %foo event failed
blah blah

Soft:

> |knob %foo %soft
>=
> |pass [%d %crud %foo 'blah blah' ~]
>=
crud: %foo event failed

Hush:

> |knob %foo %hush
>=
> |pass [%d %crud %foo 'blah blah' ~]
>=

|mass

Print a memory report.

Examples

~zod:dojo> |mass
.....(truncated for brevity).....
total road stuff: B/376
space profile: KB/12.936
total marked: MB/176.019.156
free lists: MB/35.927.760
sweep: MB/176.019.156

|meld

Deduplicate memory.

Note this can take a large amount of memory to complete if the ship's existing memory footprint is large. If the host OS has limited memory, it may be more efficient to shut down the ship and run it directly from the runtime.

Example

> |meld
>=
~zod:dojo> hash-cons arena:
root: B/160
atoms (41308):
refs: KB/927.360
data: MB/48.373.356
dict: MB/1.416.880
total: MB/50.717.596
cells (3500719):
refs: MB/70.491.560
dict: MB/281.966.240
total: MB/352.457.800
total: MB/403.175.556
pier: meld complete

|pack

Defragment memory.

This is lighter than |meld on memory usage but does not compact the ship's state as much.

Example

> |pack
>=
~zod:dojo> serf: pack: gained: MB/1.729.528
pier: pack complete

|rekey

Rotate private keys.

Note this should not be used unless you've changed your network keys on Bridge first. Using this incorrectly will render your ship unable to communicate.

Note also this is not for when you perform a factory reset, this is specifically for if you change your keys without a factory reset.

If your ship is a moon, you'd do the key change on its parent planet rather than through Bridge, and then use |rekey on the moon itself.

Arguments

@t

This is the long code inside the sampel-palnet-1.key file you downloaded from Bridge (or the code that your planet printed out in the dojo if a moon). It'll look like 0w9oBR.dfY5Z.LSxut.YHe3u..... You must wrap it in single-quotes when giving it to this generator, like '0w9oBR.dfY5Z.LSxut.YHe3u...'.

Example

|rekey '0w3.N7qWC.LmuS5.rY6Rb.DQxmF.ta3vf.sOQvP.xOnhv.3P7sL.SjQqb.IbAKo.EU2vM.04S6U.VStzI.RNXij.YntkC.RRG29.AqaLf'

|verb

Toggle kernel event tracing verbose mode.

When enabled, this will print a move trace for every event in Arvo.

Example

Toggle on:

> |verb
>=
%helm-verb
[ "|||||"
%give
%gall
[%unto %fact]
i=/gall/use/hood/0w2.cKFc6/out/~tus/dojo/1/drum/phat/~tus/dojo
t=~[/dill //term/1]
]
[ "|||||"
%give
%gall
[%unto %fact]
i=/gall/use/hood/0w2.cKFc6/out/~tus/dojo/1/drum/phat/~tus/dojo
t=~[/dill //term/1]
]
........

Run |verb again to turn it off.


|trim

Trim kernel state.

This command is used to reduce memory pressure. Currently, the only two vanes that do anything with a %trim task are Eyre and Clay. Eyre closes inactive channels and Clay clears its build cache. Typically these things use little memory so the impact of |trim is minimal and it is not useful. For significant memory reduction, see |meld and |pack.

Arguments

@ud

You may optionally give a trim priority number as an argument. The lower the number, the higher the priority. Currently, none of the vanes do anything with this so there's no point in specifying it.

Example

> |trim
>=